# Nernst Equation Numericals

> Nernst equation numericals for NEET Chemistry: E = E zero minus 0.059 by n log Q, Daniell cell at 298 K, equilibrium constant and Gibbs energy conversions.

- Canonical URL: https://prepelephant.com/topics/neet-ug/chemistry/electrochemistry-nernst-numericals
- Exam / course: NEET-UG · Subject: Chemistry
- Publisher: PrepElephant (https://prepelephant.com) — Prepared and reviewed by the PrepElephant Academic Review Team
- First published: 2026-10-02
- Last updated: 2026-10-02
- How to cite: "Nernst Equation Numericals", PrepElephant, https://prepelephant.com/topics/neet-ug/chemistry/electrochemistry-nernst-numericals

## Direct answer

Cell emf drifts below its standard value as products pile up, and the Nernst equation prices the drift: at 298 K, E(cell) = E°(cell) − (0.059 V/n) × log Q, with Q the reaction quotient of the cell reaction and n the electrons transferred. Standard potentials combine as E°(cell) = E°(cathode) − E°(anode) — for the Daniell cell, 0.34 − (−0.76) = 1.10 V. At equilibrium Q becomes Kc and E falls to zero, giving log Kc = nE°/0.059; and the electrical yield is ΔG = −nFE° with F = 96,500 coulomb per mol, so the Daniell cell's 1.10 V and n = 2 amount to about −212 kJ per mol of free energy. For concentration cells E° is zero and the entire emf comes from the log of the concentration ratio.

## What you must remember

- **Two Nernst forms:** general E = E° − (2.303RT/nF) log Q, and the 298 K shortcut with 0.059 V replacing 2.303RT/F.
- **Cell assembly:** E°(cell) = E°(cathode) − E°(anode), using standard reduction potentials as tabulated; Daniell cell 1.10 V.
- **Equilibrium link:** at equilibrium E = 0 and Q = Kc, so log Kc = nE°/0.059 at 298 K.
- **Energy link:** ΔG° = −nFE°, F = 96500 C per mol; a spontaneous cell has positive E° and negative ΔG°.
- **Concentration cells:** E° = 0; E = (0.059/n) log(c2/c1), the more dilute side acting as anode.
- **Q discipline:** products over reactants, concentrations in mol per litre, gases as partial pressures in bar, powers equal to coefficients, pure solids and liquids excluded.
- **SHE convention:** the standard hydrogen electrode is assigned zero at every temperature, the reference all tabulated potentials hang from.

## A Daniell cell taken through all three equations

Cell: Zn | Zn2+(0.1 M) || Cu2+(0.01 M) | Cu. Cell reaction Zn + Cu2+ → Zn2+ + Cu, so Q = [Zn2+]/[Cu2+] = 0.1/0.01 = 10, and n = 2. E = 1.10 − (0.059/2) × log 10 = 1.10 − 0.0295 ≈ 1.07 V. One line, one subtraction — but note how the more concentrated copper side was chosen cathode; reversing the ratio sign is the standard error.

Now the two conversions the same numbers unlock. Equilibrium: log Kc = 2 × 1.10/0.059 = 37.3, so Kc ≈ 2 × 10³⁷ — the reaction runs essentially to completion, which is precisely why the zinc-copper cell is the textbook workhorse. Energy: ΔG° = −nFE° = −2 × 96,500 × 1.10 ≈ −212,300 J ≈ −212 kJ per mol. Three exam questions, one data set; practise the chain until each step takes fifteen seconds.

## Sign discipline in cell arithmetic

Sign discipline fails first: Q is always products over reactants of the written cell reaction, and electrons or electrode materials never appear in it. Second slip: using 0.059 when the question sets a temperature other than 298 K — the correct coefficient is 2.303RT/nF, which at 308 K is about 0.061. Third, n counted per atom instead of per equation: dichromate's reduction consumes 6 electrons per ion, not 3. In concentration cells, candidates reach for E° values that do not exist — both electrodes are the same couple, so E° = 0 and the entire emf is the 0.059 log ratio. Finally, the hydrogen electrode questions: pH enters through Q as [H+]², so E = −0.059 × pH for the SHE-coupled hydrogen electrode — the bridge between this chapter and acid-base calculations that NEET crosses regularly.

## Frequently asked questions

### What is the Nernst equation at 25 °C?

E(cell) = E°(cell) − (0.059/n) log Q, where n is electrons transferred and Q the reaction quotient of the cell reaction.

### What is E of a Daniell cell with 0.1 M zinc and 0.01 M copper ion?

Q = 10 and n = 2, so E = 1.10 − 0.0295 × 1 ≈ 1.07 V.

### How is the equilibrium constant extracted from E°?

At equilibrium E = 0, so log Kc = nE°/0.059 at 298 K; large positive E° means enormous Kc.

### What is ΔG° for the Daniell cell?

ΔG° = −nFE° = −2 × 96,500 × 1.10 ≈ −212 kJ per mol — spontaneous by a wide margin.

### Why does a concentration cell have E° = 0?

Both electrodes are the same couple, so their standard potentials cancel; the measurable emf comes only from the concentration difference, E = (0.059/n) log(c2/c1).